CreateInsetModifier
This command creates an InsetModifier.
Using This Command
Select a face-set and apply the command.
- Select a face-set.
- Right click and choose Inset from the listed options.
- The software adds an InsetModifier to the mesh construction history.
Figures
This command insets faces by using an ExtrudeModifier. A separate command is used to create inset geometry because it's easier to understand. An inset is just a tapered extrude without an actual extrusion length.
Figure 1.1. The mesh before inset:
Figure 1.2. The mesh after inset:
Figure 1.3. The mesh before inset:
Figure 1.4. The mesh after inset:
Figure 1.5. The mesh before inset:
Figure 1.6. The mesh after inset:
Figure 1.7. Three section inset:
Figure 1.8. The final results with a few transform tweaks as well.
Registration
Command registration information is as follows:
| Category Type | Information |
| Implementation | SCRIPT |
| Module | MODIFIER_SCRIPTS.SSL |
| Category | Modifier Commands |
| GUID | {1F91FA60-F612-46D4-A453-4B81096121A9} |
| Source Name | CreateInsetModifier |
| Interface Name | Inset |
| Core | No |
| Sample | Yes |
| Access | Modify [face] option on main menu or face command menu. |
See Also
For more information: