ToggleEnableModifier

Description:

This command enables or disables the selected modifier[s].

Registration:

Command registration information is as follows:

Version Information
Application Scenome MPS, ScenomicsPartners
Module scenome.exe
Command Category Modifier Commands
Implementation script
Source Source included.
Location modifier_scripts.SSL

Use:

To use this command.

  1. Select a modifier.
  2. Right click and select Toggle Modifier from the listed options.
  3. The modifier is enabled or disabled.
    4. NOTE: Toggling modifiers can introduce paradoxes into the mesh construction history. For example, imagine that you extrude a face and then bevel the cap face at the top of the extrude. Let's say that the cap face is Face 5 in the mesh. The BevelModifier relies on geometry produced by the ExtrudeModifier. If you disable the ExtrudeModifier, you effectively disabled the BevelModifier, except the BevelModifier will continue to operate on Face 5, which might be elsewhere in the mesh! Disabling one modifier might require you to disable several other modifiers.

Copyright © 2005-2007 Scenomics. All Rights Reserved.